Last updated:
Aluminium Heat Sink Profiles Manufacturer in India
Aluminium heat sink profiles are extruded sections with a solid base and rows of fins that pull heat away from electronic components and release it into the air. Satya Metal Industries Pvt. Ltd. extrudes them in Rudrapur, Uttarakhand, and supplies standard designs from a 10-page catalogue as well as custom sections made with dies from its own tool room. LED, power electronics and equipment makers buy them in full lengths or cut, machined and anodized, ready to mount.
Satya Metal Industries Pvt. Ltd. is an aluminium heat sink profiles manufacturer in India extruding standard and custom finned sections in Rudrapur, Uttarakhand. It offers a 10-page heat sink catalogue, makes custom fin dies in-house, and supplies sections cut to length, machined and anodized for LED, UPS, inverter and drive makers.
Aluminium Heat Sink Profiles Catalogue
Our aluminium heat sink profiles catalogue shows standard fin designs with drawings and profile codes. If none matches your thermal design, we can make a custom die.
Aluminium Heat Sink Profiles Specifications
| Specification | Details |
|---|---|
| Product | Aluminium Heat Sink Profiles |
| Manufacturer | Satya Metal Industries Pvt. Ltd., Rudrapur, Uttarakhand |
| Alloy | 6063 (other grades on request) |
| Profile Types | Finned heat sinks, flat-back sections, LED and enclosure-type heat sinks, custom designs |
| Finishes | Mill finish, anodizing (matte or gloss), powder coating in RAL shades, wood grain |
| Fabrication | Cut to length, punching, drilling and machining on request |
| Catalogue | 10 pages of standard heat sink designs with profile codes |
| BIS Marks in Catalogue | IS 733 (CM/L-8300192310) and IS 1285 (CM/L-8300192411) |
| Management Certifications | ISO 9001:2015, ISO 14001:2015 |
| Custom Sections | Made to your drawing with dies from our own tool room |
| Supply | Pan-India and export, from 30,000 MT+ yearly capacity |
Where Aluminium Heat Sink Profiles Are Used
Aluminium is the standard heat sink material because 6063 conducts heat at about 200 W/m·K, around half as well as copper, at roughly one third of the weight and a much lower cost.
LED Lighting
Street lights, high bays, panel and linear fixtures where heat shortens LED life.
UPS and Inverters
Cooling for power devices in UPS systems, solar inverters and chargers.
Motor Drives and Controllers
Heat sinks for VFDs, servo drives and industrial controllers.
Power Supplies
SMPS units, rectifiers and battery chargers.
Telecom and Electronics
Enclosures and heat sinks for outdoor and indoor electronics.
Custom Thermal Designs
Sections made to your drawing for a specific heat load and space.
Looking for enclosures or motor housings rather than heat sinks? See our aluminium profiles for electronics and aluminium motor body profiles.
How to Choose the Right Aluminium Heat Sink Profile
Thermal performance depends on design as much as material. Check these points before you pick a section.
| Your Requirement | What to Check | How Satya Metal Handles It |
|---|---|---|
| Enough cooling for your heat load | Fin surface area, fin height and base thickness | Standard designs in our catalogue, or a custom die cut to your thermal drawing |
| Natural (fanless) cooling | Wider fin spacing so air can rise between fins | Our engineers review fin spacing and suggest changes before die making |
| Tall, thin fins | Fin height to gap ratio, which limits what can be extruded | Our tool room checks the ratio and the die design for consistent fin geometry |
| Good contact with components | Flatness of the mounting base | Stretching and profile correction, with machining available for critical faces |
| Better heat release | Surface finish of the fins | Anodizing raises surface emissivity compared with bare mill finish |
Finish Options for Aluminium Heat Sink Profiles
All finishing is done in-house at our Rudrapur units, so colour and coating quality are controlled by the same team that extrudes the section.
Mill Finish
Bare aluminium for internal heat sinks or where you apply your own finish.
Anodizing (Matte or Gloss)
The most common heat sink finish: it protects the surface and helps release heat by radiation.
Powder Coating (RAL Shades)
Used where colour matching matters, keeping the coating thin on fin areas.
Wood Grain Finish
Usually not used on heat sinks. Available for visible decorative sections only.
How We Make Aluminium Heat Sink Profiles
Heat sink fins are thin and closely spaced, which makes die design and extrusion control critical. These four steps keep fin geometry consistent from batch to batch.
Own Billets
Logs cast on our hot top casting line, with a spectrometer check on every melt.
Own Dies
Dies made in our tool room on VMC, wire-cut EDM and EDM machines.
Extrusion and Ageing
Extruded on 7 presses (600 MT to 2,750 MT), stretched, corrected and aged.
Finish and Fabricate
Anodized, powder coated or wood grain finished, then cut and machined if needed.
Full plant details are on our page about the top aluminium extrusion manufacturer in India.
Who Buys Our Aluminium Heat Sink Profiles
LED Fixture Makers
Standard and custom heat sinks for indoor and outdoor lights.
Power Electronics Makers
UPS, inverter, charger and SMPS manufacturers.
Industrial OEMs
Drive, controller and equipment makers needing custom sections.
Dealers and Distributors
Standard heat sink sections for stocking and resale.