Last updated:
Aluminium Railing Profiles Manufacturer in India
Aluminium railing profiles are the extruded base channels, handrails, caps and connecting sections that hold glass or panel infill on balconies, staircases and terraces. Satya Metal Industries Pvt. Ltd. makes them in Rudrapur, Uttarakhand, from its own billets and dies, with sections ranging from light handrail profiles to heavy base channels that clamp toughened glass. Railing fabricators, glass installers, builders and dealers buy them mill finish or with outdoor-grade anodizing and powder coating.
Satya Metal Industries Pvt. Ltd. is an aluminium railing profiles manufacturer in India making base channels, handrails and cap sections in Rudrapur, Uttarakhand. Its 2-page catalogue lists each section with a profile code and weight per metre, from 0.616 kg/m up to 5.268 kg/m for the 120 mm wide base section, and carries BIS marks for IS 733 and IS 1285.
Aluminium Railing Profiles Catalogue
Our aluminium railing profiles catalogue shows each section with a dimensioned drawing, profile code and weight per metre. Weight per metre is a useful first check of how much load a base section can carry.
Sample Sections From the Catalogue
Every section in the catalogue has a profile code, a dimensioned drawing and its weight per metre. A few examples:
| Profile Code | Main Dimensions (mm) | Weight (kg/m) |
|---|---|---|
| 366204 | 120 x 45.3 | 5.268 |
| 366205 | 60 x 45 | 1.513 |
| 366206 | 40 x 35 | 0.616 |
Dimensions are read from the catalogue drawings. Open the full catalogue for every section, and quote the profile code when you order.
Aluminium Railing Profiles Specifications
| Specification | Details |
|---|---|
| Product | Aluminium Railing Profiles |
| Manufacturer | Satya Metal Industries Pvt. Ltd., Rudrapur, Uttarakhand |
| Alloy | 6063 (other grades on request) |
| Profile Types | Glass railing base channels, handrails, caps and connecting sections |
| Finishes | Mill finish, anodizing (matte or gloss), powder coating in RAL shades, wood grain |
| Fabrication | Cut to length, punching, drilling and machining on request |
| Catalogue | 2 pages, profile code and kg/m for every section |
| BIS Marks in Catalogue | IS 733 (CM/L-8300192310) and IS 1285 (CM/L-8300192411) |
| Management Certifications | ISO 9001:2015, ISO 14001:2015 |
| Custom Sections | Made to your drawing with dies from our own tool room |
| Supply | Pan-India and export, from 30,000 MT+ yearly capacity |
Where Aluminium Railing Profiles Are Used
Aluminium railings are light, do not rust, and need far less upkeep than mild steel or wood, which is why they are now common on apartments and commercial buildings.
Balcony Glass Railings
Base channels that clamp toughened glass for a clear, frameless look.
Staircase Railings
Handrails and base sections for internal and external stairs.
Terraces and Rooftops
Outdoor railings with anodized or powder coated finishes.
Pool Decks
Railings near water, where aluminium avoids the rust problems of steel.
Commercial Atriums and Malls
Railings for mezzanines, atriums and walkways.
Handrails and Caps
Top rails that protect the glass edge and give a comfortable grip.
How to Choose the Right Aluminium Railing Profiles
Railings are a safety item, so check these points with your structural consultant before you finalise sections.
| Your Requirement | What to Check | How Satya Metal Handles It |
|---|---|---|
| Correct glass thickness | Inner width of the base channel against glass plus gasket | Catalogue drawings show channel dimensions, and our team confirms fit for your glass |
| Higher wind or crowd loads | A heavier, deeper base section and the fixing design | Heavy base sections up to 5.268 kg/m. Final design should be approved by your structural engineer |
| Outdoor or coastal sites | Protective finish on all exposed faces | Anodizing or powder coating done in-house and checked in our wet chemical lab |
| Handrail matching the base | Same finish from the same batch | Base, cap and handrail finished together from our own billets |
| Faster installation on site | Pre-cut lengths and fixing holes | Cutting, punching and drilling on our automatic fabrication lines |
Finish Options for Aluminium Railing Profiles
All finishing is done in-house at our Rudrapur units, so colour and coating quality are controlled by the same team that extrudes the section.
Mill Finish
Bare aluminium for profiles that will be clad or coated by the fabricator.
Anodizing (Matte or Gloss)
A hard oxide layer in matte or gloss, suited to outdoor railings that need low upkeep.
Powder Coating (RAL Shades)
Any RAL shade, often black, grey or white to match the facade.
Wood Grain Finish
A wood look for handrails without the maintenance of real timber.
How We Make Aluminium Railing Profiles
Base channels must hold glass tightly along their full length, so straightness and wall thickness matter more here than in most profiles.
Own Billets
Logs cast on our hot top casting line, with a spectrometer check on every melt.
Own Dies
Dies made in our tool room on VMC, wire-cut EDM and EDM machines.
Extrusion and Ageing
Extruded on 7 presses (600 MT to 2,750 MT), stretched, corrected and aged.
Finish and Fabricate
Anodized, powder coated or wood grain finished, then cut and machined if needed.
Full plant details are on our page about the top aluminium extrusion manufacturer in India.
Who Buys Our Aluminium Railing Profiles
Railing Fabricators
Base, handrail and cap sections from one supplier in one finish.
Glass Installers
Base channels sized for common toughened glass thicknesses.
Builders and Developers
Project volumes for apartment balconies and staircases.
Dealers and Distributors
Standard catalogue sections for stocking and resale.